Anionic Polyacrylamide (PAM)
High molecular weight anionic flocculant for coal washing, mineral processing, metallurgy and municipal sludge thickening.
Overview
A blend of multi-hydroxyl complexing groups and activating ions that improves collision efficiency between fine particles and colloids. Dosed after PAC at 5-15% of the primary coagulant, it turns loose flocs into dense, fast-settling ones and lifts filter capacity.
Key features
- Dosed at only 5-15% of the primary coagulant
- Settling rate improved by more than 30%
- Recovers performance in cold, low-turbidity or high-colour water
- Cuts primary coagulant demand and total chemical cost
Applications
Where this product works
Waterworks coagulation enhancement, cold and low-turbidity raw water, textile and paper effluent polishing, reuse pre-treatment.
Product range
Other product lines
Cationic Polyacrylamide (CPAM)
Cationic flocculant for organic sludge dewatering, with charge density from 10% to 60% and low cake moisture.
Polyaluminium Chloride (PAC)
High basicity inorganic coagulant with a wide pH window, fast floc formation and predictable cost per tonne of water.
Decolorizing Flocculant
Cationic decolourising agent for dyeing, pigment and paper effluent, with colour removal above 95% and simultaneous COD reduction.
Fluoride Removal Agent
Deep defluoridation agent that holds effluent fluoride below 0.5 mg/L without a second pH adjustment.
River and Lake Remediation Agent
Mineral based in-situ remediation agent for black-odour water bodies and contaminated sediment: fast clarification, long-term nutrient control.
Sample Request
Test before you commit
1-2 kg of Hydroxyl Co-coagulant can be sent free of charge, freight collect, with a jar test report from our laboratory.